Running a Hoverboard Motor with a MotorController using and Arduino Uno Part 1.
31,729
Published 2023-03-23
#arduino #motorcontrol #balance #embedded #robotics
-------------------------------------------------- o --------------------------------------------------
Twitter: twitter.com/MotherForger
Discord: discord.gg/dDvQ5Nqu
Telegram: t.me/MotherForger
All Comments (21)
-
excellent work lad
-
thank you so much!
-
Thanks for a very helpful video! I'm making a remote trash can for a client using these wheels.
-
πππ
-
Is your intro based off the PlayStation 1 boot screen? Lmfaooo π
-
Hi, thank you for that video, why didn't you use the green input screws? 0-5v for example for speed ? I have a similar board and i use the voltage to control it
-
Can the motor controller board send back data from the Hall effect sensors to the Arduino, please?
-
I want to drive two of these motors, still attached to the Hoverboard frame, with an Arduino board placed somewhere in between them. That's still a fairly large distance for the PWM wire. Did you encounter any issues with signal quality?
-
Bro can we get 10inch hoverboard wheel motors
-
Can you control the motor without the haul
-
Hey, do you mind to share to link for this MotorController board? Thanks!
-
Can i use a controller without the hall sensor input (5 pins)
-
Hi i have mounted a 350w hoverboard motor on my bike. When i used the board from the hoverboard the motor could move the bike with me sitting on it. When i switched to a board like this(36-60v 400w 20a) the motor can barely move the bike without a human sitting on it. Pls help
-
I did this setup but the wheels are extremely noisy. Any tips?
-
Will it run if you unplug the hall wires ?
-
Why need 1 second to command accept?
-
Link to the controller please
-
Can you connect 2 motors to this board
-
can you go backwards too? I realy need to know this, apreciate answrere sone!
-
Name of controlling board
