Make CUTTER From Drilling Machine ( Metal, Wood & Marble )
1,833,414
Published 2016-09-26
You Make CUTTER From Drilling Machine ( Metal, Wood & Marble ) At HOME Very EASY
Video URL: • Make CUTTER From Drilling Machine ( M...
Preparation :
1. Drill Machine
2. Wood Cutting Blade
3. Metal Cutting Blade
4. Marble Cutting Blade
5. Washers
6. Nuts & Bolts
7. Spanner
8. Plier
WARNING : Use Safety Guard
Cutting Wheels Improperly Use Are Dangerous.
नमस्कार दोस्तों, आपका बहुत बहुत स्वागत है हमारे चैनल "EASY LIFE IDEAS" में, जो Creative और Technical Ideas के बारे में है, "EASY LIFE IDEAS " चैनल में आपको हमेशा एक नयी वीडियो मिलतें रहेगी.
जो आप के जिंदगी को आसान और आरामदायक बना सकती है |
Hello friends, Welcome to My Channel "EASY LIFE IDEAS", My Channel is about Creative and Technical ideas.
Which Serves You The Best To Make Your Day To Day Life Easier And More Comfortable.
Thanks For Watching My Videos & Please LIKE , SUBSCRIBE and SHARE My Channel.
For Business Enquirie : [email protected]
About EASY LIFE IDEAS Channel:
This channel is all about How To, Home Made, DIY, Great Ideas, simple, funny, Tech and entertainment for Viewers…
This Channel Promise
To Its Viewers To Promote It's Innovation At You !
Thanks For Watching My Videos & Please LIKE & SUBSCRIBE My Channel For More 'IDEAS'
WARNING: My videos are provided only for entertainment and watching purposes only. Please don't try to do what I did in my videos.
No one is liable for any loss or damage caused by your reliance on information contained in my videos. Entertain yourself but always be safe, and everything you do is at YOUR OWN RISK!!!!.
All Comments (21)
-
Never try this, it can cause a serious injury or can take your life. When you cut any material usually the blade kicks back. There is no safety covers to protect you here. Better to go for angle grinder for the circular saw. Your life is more precious than saving few bucks.
-
I purchased these attachments online and used on my drill machine. I found the wood cutter is very risky as it has very sharp teeth and to cut a plywood of 18mm you need to use lot of force to keep the drill in position and cut. Any mistake or loose grip will injure the persons around and may damage the work piece, though I worked safely. It can be used once in awhile jobs like DIY jobs, not regular work. For which you should use specific tool.
-
I think your hand is more precious than a angle grinder
-
This is so clear demonstration thank you
-
I will use this for cutting pvc but nothing harder than that for my own safety, but i love the idea. Thank you
-
gloves and eye protection. most important. great DIY emergency solutions
-
Thanks, thats very handy, for small jobs, for big jobs has to be very very careful or better don't and try to buy safety proper one
-
I had seviour injury nearly cut my stomach 😭😭😭😭 delete this video
-
Okay, now make a drill with an angle grinder 😸
-
great idea thanks
-
Dangerous and very hazardous tool, all cutting disks should have a Guard to protect the user from accidental contact and in case the disk shatters or breaks loose during the cutting process. Do not use that method for safety reasons, it's what we call unsafe homemade tools.
-
Best Tricks Thanks sir for your review 🙏
-
Excellent idea thanks
-
Drills typically turn at 3500-4000 rpm while Rotary Tools turn at 5000-35000 rpm. These are totally different tools. You can put a cutting wheel on a drill but you will wear the motor and contacts of the drill. It is velocity/speed that does the job for a rotary tool plus the disks are very thin so it "cuts". The drill is just "grinding".
-
Very good and helpful. Thanks
-
Excellent idea...multipurpose tools across
-
Worth to watch. 👌👍
-
Thank you, I was looking every were for bits which have the same concept but could not find it in our market .. This video really made my day .. Thank you again
-
Amazing Talent, thanks for sharing...
-
Very very much helpful..very nice good job