How Does This Fly With Only 1 Wing?

247,642
0
Published 2024-05-04
Hey all! I really do appreciate everyone watching, thank you! In today's video we're exploring the physics behind the mono-wing. I started by 3D printing wing sections that was glued in order to complete an entire wing. However, it proved to be too heavy. I made a new wing out of depron foam which worked a lot better. The best way to support the channel is to simply watch my video, thanks guys!

PCBWay: www.pcbway.com/?from=rclifeon
PCBWay offers PCB manufacturing, 3D printing and CNC services.

Music:
Arcaders - Ben Elson
Racing Hearts - Mattie Maguire
ES_Temple of Runha - ELFL

All Comments (21)
  • @IslandHermit
    Your English is just fine. Certainly beats the hell out of my Swedish.
  • @richbuilds_com
    Dude, don't worry too much about your translations. They get the message and details across. Good stuff!
  • @nateolmsted22
    That one flight where it skipped off the ground and recovered was my favorite 😅 that thing is terrifying
  • @Project-Air
    Nice one Simon 😊 So cool to see someone else trying these one winged helicopters! I also based by designs on that original Charybdis design and found the extra stabiliser unnecessary. If the wing has a positive angle of attack, it works just like a flying wing (with no tail). I’ve also found other designs work without the counterweight (again, like a flying wing).
  • @AndreasA.S.
    when having issues translating, dont be afraid to just say the word or phrase in your native language. Laura Kampf has said "Geil" so often, im sure everyone understands it now
  • @macswanton9622
    You humor is matchless. I don't really care which project you pick, your sense of comedic rhythm and involvement rivals the all-time greats, like Buster Keaton. I am a fan!
  • @Pomaufour
    Those 9:50 minutes until you mentioned the leading edge of the wing was facing the same way as the prop were Excruciating man...I did not see anyone in the comments mentioning it at a glance...I was screaming internally ! And then...FINALLY !
  • @hansadler6716
    I like how you said it spins the right way and then you used a left-hand propellor.
  • I love that you show the failures along the way, it makes the successes that much sweeter.
  • @malvoliosf
    Your English is fine. When the wing is free to move, the center of gravity is going to be directly below the center of lift; that is just physics. If that orientation of the wing is then such that the thrust vector is not pointing straight down, the wing is going to spiral off at random. The problem is, the center of lift tends to be halfway down the length of the wing, while the center of lift is much closer to the motor, so the wing will yaw (or bank, depending on how you look at it) severely, trying to get the COG directly below the COL. I don’t see how to overcome this.
  • @danielfearn6076
    The weight on the stick isn't to offset the centre of gravity, but to provide pitch stability of the wing. Without getting too deep into the dynamics, the weight on a stick increases the moment of inertia along the wing spar axis which, once spinning, creates a stabilising gyroscopic force that prevents the wing from pitching.
  • @HenrikoAlberton
    I love how the noise it makes is comically cartoonish, nice work dude!
  • @jaysonrees738
    I've heard native English speakers do worse. No need to worry at all. Besides, sometimes it helps the goofy tone of your videos and makes them that extra bit unique and fun. Thanks for always putting a smile on my face!
  • @gutrali
    Why didn't you stick the pole into the ground to run these first tests so that you didn't have to be in the line of fire 😂
  • I'm very surprised at how such a tiny motor could have the power to move such a big wing so fast, that's a lot of torque, considering its length, goes to show how obscenely powerful brushless motors are nowadays lol. Great job.
  • @mickwolf1077
    it's definitely one of the most hilarious flying contraptions I've seen.
  • @rugan0723
    Great video! I love how people are rediscovering the .049 models we use to build and fly 50 years ago...
  • @bernieshort6311
    The issue with your English is in your head, I am English born and bred there and a proud member of the UK. I understood your speech very well. What a concept, does one have to be mad to think of it 😁 You have earnt a subscription from me. Thank you very much. What a wild idea.
  • @tonyv3rd
    Always happy and thrilled to see your content!!
  • @Carljouannet
    I've been watching your videos for awhile now, always top notch! Keep having fun with it and you'll continue to thrive 👍