Sig Sauer Romeo X review. Why did I remove the Holosun EPS Carry? P365 X Macro Icarus.
26,065
Published 2023-08-11
All Comments (21)
-
You can lock the buttons on the side. Hold down the plus’s button for three seconds.
-
If he had only bothered to read the owner's manual of the EPS Carry! Pick your brightness setting then hold down the + button until the reticle blinks once. It's now in lockout mode so the brightness setting can't be changed and the reticle can't be turned off inadvertently! Yes the buttons are also audible. The EPS Carry is an enclosed emitter while the Sig Romeo X is not and the EPS Carry is about $50 cheaper. The EPS Carry also doesn't have a huge protrusion and unsightly battery door on the right hand side either. 😉
-
Thanks bro. I’m about to pull the trigger on optic….this helps a lot.
-
So were you locking out the buttons on the EPS or not?
-
A beautiful and impressive video. especially these days when I'm debating what to buy (romeo x or holosun). But the most beautiful thing in the video is the icarus precision grip. I live in Israel, they don't ship to my country and I heard that recently there is a polymer grip!!!
-
Would you get the 365 with the comp or without ? Some people say the comp leaves the front of the gun dirty all the time. I’m going to get one of the 2 this weekend . Was going to get EPS carry I will check out the Sig x does it have shakeaway ? Heard you could lock the Holosun out to a setting so it doesn’t move tho. Thank you
-
I didn’t have to use the plate with the EPS on my 365. Also you can lock the buttons on the EPS
-
Hell yeah giz, just grabbed one from them thanks for hollering them out... everyone I get optics from at shot show probably drunk on a plane now..😂...right size screws come with it for the p365 right brother?
-
Do the Romeo X adjusters have a nice click to them?
-
I heard there is the Sig Romeo-X and the Romeo-X Compact, which is compatible with the X-Macro?
-
Does the sig have a lock out option? Which one would you bet your life or families on in the worst situation?
-
I thought that eps Cary had a lockout feature to keep you from doing what you said…?
-
The eps carry can be mounted without the plate by requesting free / corrected height screws from holosun
-
Do you have a video on the lower you have?
-
Notice you have a LCI barrel. Does that affect the optics?
-
great slide. from?
-
I also see your EPS Carry was rubbing on the slide. I had that issue with the Vortex Defender. According to Vortex, they have seen this on other P365/X/XL slides where the SIG factory milling isn't consistent at the front. So the curved "edges" either interfere with the optic (it won't seat flat) or like your EPS Carry, digs into the finish.
-
I accidently push the brightness down every time I rack the slide with the sig
-
One of the benefits of the Romeo X is you don’t need the suppressor height sights for backup. Standard height is fine. Are you putting the old ones back on? Seems the back sight blocks a decent amount of the glass.
-
What grip module is that? Looks pretty sweet.