Hoover Tumble Dryer Dynamic Text error fault codes on one touch or Candy smart touch

Hi, great video! I have a Hoover DXC10TCER. It’s not showing any error codes but it is not drying. Drum is getting hot but cycle stops before the load is dry. Could you please advise which part may be faulty- thanks ☺

Thank you, very informative

I am Indian.Your all vedeos help full thanks

Hi, looking for help with a Hoover dynamic next...it comes on but no numbers just lines, thus can not start

Thanks so much Very useful

Hi where would you recommend buying a replacement thermal fuse from for an e21 code. Thank you.

Hi can you tell me the rely I need to replace to make the pump work code E22 is it RL2 or RL1 on the Main Board.Do you have one and how much. Thanks Gary.

Good day Sir...I have a white westinghouse condenser dryer having an error code 33...it runs and stop in 2-3 secs and 33 error code flashes in the display. Thanks in advanz for any ideas/advise.

Do you need to clear the codes off the machine? what if you've tried everything and still get e11? Thank you for the video it's been massively helpful

Hello good afternoon ? First tanks about the video explains everything .My one is same model same everything the problem . only blink don t say any error is not working . I’m press start e nothing . Please you have any I’d about that anomaly .

Hi, thank you for your assistance it has been very helpful. I have an E14 code flashing on my hoover dryer. I noticed whilst E14 code is flashing that it does not warm up when keeping it running. Does this mean the there is more issues then just the ntc as you mention in your video?

my heat pump is showing e05 is it just the sensor?

Hi I have a Hoover model DX HY10A1TCE-80 THE MACHINE TURNS ON BUT WHEN PROGRAMME IS SELECTED AND YOU PRASS START IT DOES NOT START CAN YOU RECOMMEND MANY THANKS

Hi. E22 on either vented or condenser dryers is down to a oc Ntc on the heater. As you look from the back, it will be the left Ntc, e21 is normally the one on the right

I have an E11 and I have replaced the NTC sensor but the wires to the connector to the sensor have come out. Any ideas?

Hoover heat pump tumble dryer DMH D1013A2-80 . Can you please tell me what is the error code 04 means? Dryer will not stop when in off position and it carrys on running for 5 seconds then E04 appears in the setting screen and is only then the tumble dryer stops but the E04 keeps flushing with broken audible beeps. Please help. Thank you.

hi my dad have a bosch washmachine when it starts over a few minuts when the wash get heating the water the earth leakage circuit breaker turned off .Sorry im Dutch my english maybe worst.

Hi, I have an e21 fault code for a Hoover DX HY10A2TCE-80 Do you have any advice please?

Thanks for the informative video. My Hoover One Touch dryer has decided to not turn off, even when the dial is set to off. There are no error codes, but the display panel is completely illuminated. I had to pull power to get it to stop, when I reapplied power it started spinning again and some smoke was visible coming out of the top at the front. Any ideas? Is it worth fixing?! I've never been very happy with it, I've always found you had to press the start button 2 or 3 times to get it going (so not One Touch), as some other people have noted. Many thanks!

Hi and thank you for this informative video. I was looking to find out what error E4 was and if it was something i could do my self. Its a Candy grand vito tumble dryer. Thank you.