The Ultimate DIY Motorcycle Trailer: Load Your Bike Solo! 🚴✨
87,042
Published 2024-07-31
#MotorcycleTrailer #DIYTrailer #SoloTravel #MotorcycleAdventures #GarageBuild
All Comments (21)
-
Absolutely brilliant, very nice trailer. I will only make a safety suggestion, you only "lock" used to hold the lowering bar down to the trailer is not backed up with a safety pin or latch of some sort. It has been my experience that the current latch will, at some point, fail and allow the lowering bar to come loose and cause you lose your load. With the addition of the hold down hoops on the same lowering bar you are putting more load on the bar with no back up safety, again, causing the hold down pin to potentially work its way loose, rising up and causing your load to be lost since the hold downs are not attached to thw bas frame of your trailer. Fix that... and i think you have a superbly awesome bike trailer. Keep up the great work. Note, i did watch the whole video and if i missed where the lock for the pin is, well, thats my bad, im sorry. Still a great trailer
-
Excellent job---I would recommend a secondary tilt lock or safety chain . Thanks
-
Thank you for not editing out the mistakes.
-
Regelmatig kijk ik inmiddels dik 4 jaar jouw projecten, van een kleine garage naar wat het nu is. Heb veel respect met mensen die iets maken, verbeteren en zelf nu nieuwe dingen ontwerpt, deze trailer nu. Mijn respect en heel veel succes voor de toekomst! ✨
-
Красавчик са Вош, везчу Дала аьто бойл хьа.
-
I'm favoured, Getting my own Truck has always been my Dream for my business. I just acquired 2 recently, earning $42K weekly has been really helpful. I can now give back to the locals in my community and also support Charity Organizations
-
МашаАллах1! Как раз и езаш варкх со, сай мотоцикл ц1а перегнать еш))
-
Sei una continua Ispirazione. Nela chiusura a molla, metti un bullone passante per il blocco totale di sicurezza, per i lunghi tragitti o per strade disconnesse.
-
I love the concept and 99% of the construction but please get wheels with the correct pitch circle diameter for your hubs.
-
Genius! Pure genius. You have a need, and you fill the need. And you do it without spending 20x more to get something that might sorta work. Might not. You make it to suit the need perfectly. But dude, you have to be more careful. That wire on the lathe could have really done some bad things to your hands. Protect your hands, eyes and ears. Stay safe.
-
That is the best motorcycle trailer I have ever seen! Brilliant!
-
Bravo ottimo video ottimo lavoro, sei un vulcano di idee realizzate perfettamente bravo e complimenti, ti seguo sempre al prossimo video un saluto Gek.
-
I love the over-center mechanism in this trailer. The whole thing could be easily modified to fit multiple bikes also.
-
Ассаламу 1алекум, са Ваш! Дик болх бу ашшим бинарг! Дала 1атту бойла шу шина! 😊👍
-
I was not disappointed again. It turned out great, like all your projects so far.
-
Excellent, as always. Cheers.
-
Absolutely brilliant trailer design for hauling a motorcycle and a great job building it. Very well done on building it as well. I believe it will have a long life of use and be a very safe way to haul a motorcycle. The only thing i could think of to add to protect the motorcycle from rocks would be some type of plastic or polycarbonate between the car and motorcycle on the trailer.
-
That's exactly what I need for my law mover tractor 😉
-
the best pickup i ever seen handmade
-
I enjoy every one of your videos. Keep filming.