They Made A Leatherman With A MAGNACUT Blade!?

My Amazon page! The gear I use here on the channel! - www.amazon.com/shop/metalcomplex Thanks so much for watching! You can support my channel on Patreon here - www.patreon.com/metalcomplex MC stickers! - www.redbubble.com/people/metal-complex/shop?asc=u

It works like the Free series. All of those tools are accessible one handed. There are little lips near the end of the tool. Once you put pressure there the tools pop out. The more you know....

Watching you struggle getting the tools out while knowing you figured it out in a livestream a few weeks ago was quite entertaining 😂😂😂.

I shamelessly use my arc as a fidget toy. The sheath is a bit kit, for all my regular use impact ready bits, and a few regular quarter inch extensions. Liked the review brother.

Got the Arc about a week ago.. hasn’t left my belt since, things awesome 👏.. checks all the boxes ✅ Aside from it my regular edc is a custom bugout Ti / M390 .. Lynch NW prybar , Ti Fenix pen 🖊️, Olight M2R warrior pro … then wallet / smokes 🚬 😅/ 📱/ lighter .. and a few random things I don’t know why 🤷‍♂️.. I just felt like sharing a pocket dump / EDC rotation… it would be cool to hear from others too , if you feel like sharing :)

I had mine already when I watched this, its a great tool. Can't wait for you to figure out how to get the screwdriver out without a struggle. the snap when opening the plyers is just great!

MC discovered how to access the driver and can opener on the livestream

Mine arrives tomorrow! Can't wait!

I seen a few vids on this tool and the wire cutters break cutting a coat hanger which is very soft metal.

leatherman: announces arc *million years pass* Metal complex: A Leatherman With A MAGNACUT Blade!?

Right onto the Christmas list! Thanks MC!

Don't cut a coat hanger 😂

Look at the groove on the tange of the tools by their pivots, roll your thumb over it like a front flipper.

Lucky you having the ARC. I'm thinking about getting it myself, only thing is I often use my MT's for carving. Anyway I was wondering if you would you be kind enough to test it on, say, just a piece of green wood, maybe an inch thick or so, up against the Wave? Please

That was incredibly difficult to watch you struggle with those middle tools lol

I'm watching this at .5 speed and I'm literally in tears from laughing so hard

you push on the base of the tool (at the top by the pivot) to pop the tools up

The little curved things at the top of the center tools can be used to flip the center tools out with 1 finger/hand, im sure you figured it out by now I tightened my handle pivots very slightly because they had some play and I threw some 5 or 10 weight nano oil in the tools and some heavy oil in the pilier and handle pivots. Its not perfect because I think the bit driver tool and bit set in particular needs a "bit" of work in a few areas 😂😅 but overall its still a good multi tool. (I think it should have a better heat treat on the bits, less play on the bits inside the bit driver and personally I was also disappointed the bit set they provide didnt include any bits that could be used to actually disassemble a pocket knife, at least none that I own.

Use the indentions on the side near the top to get the tools out. Watch a video n youll see

My Arc comes in tomorrow. Got me one for my birthday to myself haha.