BLIND REVIEW🧐: This New Sheet Metal Cutting Tool..SURPRISING RESULTS🤔

👇👇If your interested in getting this tool hit the link Link to TOOL: geni.us/lMCpA (Amazo

i bought 1 lubed the moving parts and cut ribbed sheet metel for the wifes new garden boxes 5 times faster then my air niblers and my usual zip cutters which makes dust. if it did spin out on a rib i lifted or pushed forward and away it went again . I was impressed . remember lube the drive shaft that chuck tightens onto.

Might be interesting to mount it on a drill press and feed the metal into it. Maybe with a fence or guides on the drill press table to keep it going straight.

About 50 years ago black and decker produced a jigsaw type tool that used round cutters like this instead of a straight blade. Worked great. But of course they discontinued the product. I got one of these new nibbles today and it tore up after a few passes. To bad because I was really excited to see this design back in use.

I would suggest testing it with clamps on a table so you are not fighting against the free movement with one hand while trying to guide with the other. Might get better results.

I build metal building and bought one from Amazon and mounted it on a dewalt drill thinking this would make things a little easier. We mainly cut 26 gauge sheet metal and this shear didn't last 5 minutes. I would not suggest wasting your money on this item!

He who dies with the most tools wins-I really beleive that! Faster than hand snips!

Thanks for the video Al. I was hoping to see it do STRAIGHT and CURVED cuts but at this time, I think it might be more controlled using a saber saw with a fine tooth metal blade against a flat work surface. The idea of a rotary wheel cutter is good but not on a sub-standard tool made partially out of aluminum , magnesium or whatever alloy they cast for the structure. Keep us informed if better results are achieved on an upgrade. I did see that on Amazon alternate cutters come with a blown plastic case and not just cardboard box and bubble wrap.

Thank you for video now using my cutting

It seems pretty nice to me-- and only for $35. I think if it was used more with a bench vise clamp you'd be able to get a straighter line out of it compared to trying it by hand. With hand there's a lot of things that can move, while if the metal is in a vice clamp the only thing moving more is going to be your drill. Good video though.

I just received mine, couldn’t use the handle grip thing cause it don’t fit on my dewalt cordless drill. But besides that I think it will work great. This will save me time breaking down cardboard boxes to throw in recycle bin instead of using my exacto knife on the driveway floor and killing my blades. That for me is the added bonus. I bought this to cut perforated, waved fibreglass sheet, building a little overhang next to my shed. I’ll see how it will work with that. Thinking I might have to cut slower. Thanks for this video. 😎. Sometimes you end up with advertised garbage . I took the chance. I’m impressed with what it is. Quick and easy. I will call this one of my specialty tools you don’t use often but handy! Sorry for the long spiel. Cheer!

Just bought this tool I think it is fine for my purposes Thanks for the demo Very helpful That tube thing might be an assist handle- I didn’t figure that out yet and the instructions were limited.

Cheers man I only need to do a few cuts on the roof, ordered one. Thanks for the review.

Well done!

About to pick one of these up and thought I'd check some real reviews. Fkin amazing. I was worried it would curl the sheet metal on the off side as it cut. Its nuts that it doesnt. Thanks bruv

Thanks for sharing your test man. As you say, it's hard to say, though yes, it probably does the job, and I'm probably going to buy one anyway. Sheet metal cutting is one space I have been wanting to cover.

I think it would be more controllable on a shorter drill or even a small right angle drill

If the work piece is secured, you can focus on the cut and it’ll be better. I like this tool, adding to the nibbled and the double shear attachment, now I need a project

So far, I have used this for cutting 1/2” hardware cloth and it works great. I will try it on metal roofing after I am done with the hardware cloth installation.

I got the same unit from Temu and i think i paid 17.00 Canadian dollars for it. Tried it and it works perfectly