Gold Refining- Detailed Instructions

The most advisable and detailed Video in YouTube , thank you very much , after watching your video I got better knowledge about refining gold , wish you all the best and thanks again 🙏

Everything sreetips does is explained here

I truly wish I would have watched this video 1st! It would have saved me so much gold, time, headaches, panic attacks and money

bread video thank you very much

Great video thank you, will have a look at your products .

I wonder where the Aztecs, Mayans and Egyptians got their variety of acids from?

I tested the Hydrochloric acid I used to remove iron from ore and it tested Orange quite thick. Then I tried the Ammonium test one with it and it looks more white and thick. My reckoning is magnesium was in Ore. I thought the Gold would show up? I will take the Aqua Regia from the kit that I treated the ore with next and try to extract more gold from half of that to see if it will get more saturated rather than waste its ability. The Aqua Regia was 500ml and 50 grams over the specific gravity it should be normally. XRF on the ore Hematite was 90% iron and about 5% PM of many kinds at least half of them the rest copper, Nickle, and sometimes cobalt. Study study getting a clue. I would like to get the IPMI one recommended or Hoke book. If you have a good source I would be grateful. Thanks Oh one more thing the Bottom of the Aqua Regia has settled out a yellow powder? Would it be gold or what? I have not put in anything else yet just MX3

If you put up affiliate links for the equipment we need, I bet you'd make some extra money, and we'd save time trying to find appropriate fume scrubbers 😅😂 Thank you so much for the video!! I'm watching and rewatching!

Is it better to put the gold mud in a beaker, add Hydrocloric Acid to it, and then slowly add the Nitric acid with a Pipet until all of the gold mud has disolved into the solution ! This way you will not have excess Nitric Acid that you will have to get rid of.

Good luck. Get more gold.

Hello again. I've heard that mbs will also precipitate Pt or Pd so the end product will have Pt and Pd if they were within the solution. Some people are using iron sulfate to drop the gold claiming that it does not precipitate Pt or Pd. Will switching to quadratic precipitant prevent precipitating Pt or Pd with the gold? Please advise, thanks!

Some say that Corn Starch can be used as a Precipitant, Have you herd this ? What do you think ! Thank You for your prompt answer to my previous question !

Thank you for the detailed instructions. I added NaSO3 to HCl and heat them up so the former can dissolve faster. But after the solution cooled off, the salt recrystallized and the solution returned to its original color (from the yellow color of aqua Regia). Please advise on how to stop this reversing reaction. Thank you.

On person who refines his own gold on YouTube uses Sulfuric acid to get rid of any Lead that might be in his gold mud, what do you think ?

At the step of adding urea, we get gold, but out of the remaining solution, how would we get copper if it was in the impure gold?

How to remove iron from a refined gold and what give a clear shine to gold bar

I have been using muratic acid and chlorine bleach at ratio 2/3acid 1/3 bleach pour the solution into ore quartz sand stirring and let sit for min 4hrs or even days. I then pour off the solution until there is only the solution no solids noticeable. Then I mix mettasulphate and water to the solution let sit min 4hrs. The brown sugar looking solid then with double coffee filter paper then dry the paper and collect the dust that is on the paper. What is it I'm missing as I still end up with impurities as buyers won't even look at it. A step by step recipe would be greatly appreciated

Sir ji 1kg Nokia phone me kitne gram gold nikta hai.

When gold stone crushed and heat it in nitric acid why it gives difrent colors? and how to know what kinds of metals are in solution?

Quardarpole precipitant means?