Leaking Alphacool NexXxoS Monsta Full Copper 400mm radiator, damaged after 1.0 bar pressure test
2023-05-31に共有
Strangely after a personal pressure test to locate an unrelated leak with only 1.0 bar one of this model's flat brass sides has become permanently convexly deformed, leading to a heavily leaking threaded port that can't be closed again even with a lot of Teflon tape around the insert. Note the top of the insert being at an angle following the convex curve of the bent side, this is not a lens artifact or due to the camera's perspective.
Funnily enough, a second unit of the same radiator model started deforming at the very same location at only around 0.5 bar.
Note: Presently, Alphacool does not honor any voluntary manufacturer warranty on its radiators and generously only adheres to mandatory local product liability laws.
Find out more about the "high-quality" Alphacool NexXxoS Monsta Full Copper 400mm at the link below:
shop.alphacool.com/search?sSearch=14395
コメント (3)
-
The part screwed in doesnt look screwed in properly, or the defect is that it cannot be. Also, I am almost 100% EU/German law does not permit them to just say "nah, we dont do RMA in germany" unless you are suppose to get it done with the store instead.
-
Rma it
